Skip to main content
Nissan QASHQAI 2008–2010
Medium Risk

Nissan QASHQAI

2008–2010

The Nissan QASHQAI (2008-2010) has a concerning 32% MOT failure rate, particularly for corrosion.

The Nissan QASHQAI models from 2008 to 2010 exhibit a high overall MOT failure rate of 32%, based on 6,526 real MOT tests conducted by the DVSA. This statistic raises significant concerns for potential buyers, particularly regarding the vehicle's susceptibility to corrosion, which is a critical issue in the 'Worst for Corrosion' category.

Corrosion-related failures are often linked to the vehicle's suspension, brakes, and tyres, which have shown alarming defect rates. Specifically, suspension issues were noted in 107.94% of tests, indicating that many vehicles had multiple failures. Brakes and tyres also showed high defect rates at 97.85% and 83.11%, respectively, highlighting a pattern of reliability concerns that could stem from corrosion.

The failure rates vary significantly by mileage, with vehicles having over 120,000 miles showing a staggering 42.8% failure rate. In comparison, those with 0-40,000 miles had a much lower failure rate of 16.2%. This suggests that as the vehicle ages and accumulates mileage, the likelihood of corrosion-related issues increases significantly, making older models particularly risky.

Given these statistics, potential buyers should approach the Nissan QASHQAI (2008-2010) with caution, as the high failure rates and specific issues related to corrosion could lead to costly repairs and safety concerns down the line.

Useful links

Nissan QASHQAI also has known issues with:

Highest MOT Failure Rates Known Engine Defects Gearbox & Transmission Failures Expensive Suspension Problems

Common Problems

Problem Severity Typical Cost
Suspension issues High £120-£800
Brakes issues High £80-£450
Tyres issues High £50-£300

Data Source

DVSA MOT bulk data — 6526 tests analyzed

Dave

Thinking about this car?

Even problematic models can be good buys if the specific car has been well maintained. Check the MOT history to know for sure.

Check a Nissan QASHQAI

Frequently Asked Questions

The 2008-2010 Nissan QASHQAI is prone to corrosion, particularly around the wheel arches and undercarriage. This can lead to significant structural problems if not addressed promptly.
Repairing corrosion on a Nissan QASHQAI can be quite costly, often ranging from £300 to £1,000 depending on the severity and location of the damage. Regular inspections are recommended to catch issues early.
Yes, aside from corrosion, this model also faces issues with suspension, brakes, and tyres, which can lead to increased maintenance costs. Owners should be prepared for potential repairs.
While the Nissan QASHQAI offers good practicality and comfort, its high MOT failure rate and corrosion issues may deter potential buyers. It's advisable to have a thorough inspection before purchasing.
The 2008-2010 Nissan QASHQAI has a concerning MOT failure rate of 32%, with corrosion being a significant factor. This highlights the importance of checking the vehicle's history and condition before buying.

Quick Stats

Risk Level
Medium
Year Range
2008–2010
Typical Repair Cost
£250 – £1,550
Affected Areas
Suspension Brakes Tyres Tyres Brakes

Nissan QASHQAI Issues

Highest MOT Failure Rates Medium Known Engine Defects Medium Gearbox & Transmission Failures Medium Expensive Suspension Problems Medium

Also in Worst for Corrosion

Ford KA (2010–2010) Medium Fiat 500 (2010–2011) Medium Mazda 3 (2008–2014) Low Toyota YARIS (2008–2008) Low Ford FOCUS (2008–2012) Low Ford C-MAX (2011–2011) Low

Nissan Guides

Nissan Qashqai — Best Age to Buy for Lowest Cost Per Mile
← Back to all Cars to Avoid